51单片机模拟计算器数字输入及显示修订Word格式.docx
- 文档编号:737329
- 上传时间:2023-04-29
- 格式:DOCX
- 页数:9
- 大小:140.65KB
51单片机模拟计算器数字输入及显示修订Word格式.docx
《51单片机模拟计算器数字输入及显示修订Word格式.docx》由会员分享,可在线阅读,更多相关《51单片机模拟计算器数字输入及显示修订Word格式.docx(9页珍藏版)》请在冰点文库上搜索。
(3(把“单片机系统”区域中的P0.0,P0.7端口用8芯排线连接到“动态数码显示”区域中的A,H端口上;
(4(把“单片机系统:
区域中的P2.0,P2.7端口用8芯排线连接到“动态数码显示”区域中的S1,S8端口上;
4(相关程序设计内容
(1(行列式键盘输入及按键功能设定;
(2(动态数码显示;
(3(数码显示方式处理;
5(汇编源程序
(略)
6(C语言源程序
#include<
AT89X51.H>
unsignedcharcode
dispcode[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f,0x77,0x7c,0x39,0x5e,0x79,0x71,0x
00};
unsignedcharcodedispbitcode[]={0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f};
unsignedchardispbuf[8]={0,16,16,16,16,16,16,16};
unsignedchardispbitcount;
unsignedchartemp;
unsignedchari,j;
unsignedcharkey;
unsignedcharkeypos;
bitalarmflag;
voidchange(unsignedchar*p,unsignedcharcount){
while(count>
0)
{
*(p+count)=*(p+count-1);
count--;
}
voidmain(void)
TMOD=0x01;
TH0=(65536-4000)/256;
TL0=(65536-4000)%256;
TR0=1;
ET0=1;
EA=1;
while
(1)
P3=0xff;
P3_4=0;
temp=P3;
temp=temp&
0x0f;
if(temp!
=0x0f)
for(i=50;
i>
0;
i--)for(j=200;
j>
j--);
temp=temp&
=0x0f){temp=P3;
switch(temp){case0x0e:
key=7;
break;
case0x0d:
key=8;
break;
case0x0b:
key=9;
case0x07:
key=10;
if((key>
=0)&
&
(key<
10))
keypos++;
if(keypos<
8)
change(dispbuf,keypos);
dispbuf[0]=key;
else
keypos=8;
alarmflag=1;
temp=P3;
P1_0=~P1_0;
while(temp!
alarmflag=0;
P3_5=0;
if(temp!
switch(temp)
case0x0e:
key=4;
case0x0d:
key=5;
case0x0b:
key=6;
key=11;
{change(dispbuf,keypos);
dispbuf[0]=key;
while(temp!
=0x0f)temp=P3;
}
P3_6=0;
key=1;
key=2;
key=3;
key=12;
if(keypos<
P1_0=~P1_0;
P3_7=0;
key=0;
key=13;
key=14;
key=15;
}else
alarmflag=1;
voidt0(void)interrupt1using0{
P0=dispcode[dispbuf[dispbitcount]];
P2=dispbitcode[dispbitcount];
dispbitcount++;
if(dispbitcount==8)
dispbitcount=0;
if(alarmflag==1)
P1_1=~P1_1;
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 51 单片机 模拟 计算器 数字 输入 显示 修订
![提示](https://static.bingdoc.com/images/bang_tan.gif)